EN
46
Display
Operating Procedure
Description
Programming Mode
“Barista” Programming
• This parameter allows the operator to
program the amount of coffee (brewing
amount) for each button on the
keyboard.
• The brewing amount can be set in terms
of time (sec. ) or pulses. This number
refers to the number of pulses that the
flowmeter sends to the CPU.
• Once programmed, the button remains
lighted.
• It is possible to set the dose for both a
short and a long shot on the same key.
• The setting of the first group is
automatically copied to the subsequent
groups.
• It is possible to set each key individually,
in this case the dose of the first group
will no longer be used.
• It is possible to copy the doses of any
key to the others.
Program Dose
Group Dose
Settings
G1 Dose
Settings
G1B1 Dose
30
5
Press the button
T1
or T2
to view the dose. Pressing the button T3
, the dose value will blink.
Use the button
T1
or T2
to change the value, press the button T3
to confirm the desired value.
G1B1 Long Dose
60
6
Press the button
T1
or T2
to view the dose. Pressing the button T3
, the dose value will blink.
Use the button
T1
or T2
to change the value, press the button T3
to confirm the desired value.
G1B3 Mode
CONTINUOUS
7
Press the T3 button
to access the menu, then navigate using
T1
and T2
to choose between ,
3 SEC RINSE
and
CONTINUOUS
, press the T3 button
to confirm the option.
Exit
Group 1
8
Press T1
or T2
until the display shows the exit menu, press the T3 button
to return to the
“Barista” programming.
Summary of Contents for kb90 Series
Page 143: ...EN 143...
Page 144: ......
