EN
103
Display
Operating Procedure
Description
Programming Mode
“Technical” Programming
Enter Password
******
Coffee Boiler
Settings
Exit
Menu
9
To exit the menu move between the parameters using the buttons T1
and T2
until the exit menu is
displayed.
Press the T3 button
to exit the menu and return to the normal use of the espresso machine.
94.4 00:00
95.5 95.1 SB
10
Alternatively, you can exit the “Technical” programming and return to the normal use of the espresso machine
by pressing T2
and T3
at the same time.
Coffee Boiler
• The OFFSET parameter is used to
calibrate the coffee boiler temperature
system to ensure the display temperature
accurately represents the temperature
of the water exiting the group head.
• This parameter is preset at the factory
based upon initial tests of this espresso
machine.
• It is not recommended that this number
is changed. Changes to this parameter
can cause unexpected results.
• It is important to write down this value
before making changes to be sure you
can return to the factory programming if
unexpected results occur. Each machine
may have a different value as it is set
individually.
THE COFFEE BOILER CONTAINS WATER AT ELEVATED TEMPERATURES.
WATER TEMPERATURE OVER 52°C CAN CAUSE SEVERE BURNS INSTANTLY OR DEATH FROM SCALDING.
WARNING
Summary of Contents for kb90 Series
Page 143: ...EN 143...
Page 144: ......
