COMPONENT MAINTENANCE MANUAL
AVIATION RECORDERS
Model FA5000
Initial Issue Page 801
Sep. 30/11
Fits and Clearances
23–70–40
Use or disclosure of information on this sheet is subject to
the restrictions on the cover page of this document.
FITS AND CLEARANCES
1.
GENERAL
This section provides the Model FA5000 recorder’s specifications and outline and dimen-
sions. Since the recorder uses solid
−
state memory recording technology, there are no in-
ternal fits and clearances or tension values normally associated with older technology
electromechanical tape recorder units.
The information contained herein is also in the Description/Operation section of this CMM
and is presented here for the purpose of quick reference.
2.
SYSTEM SPECIFICATIONS
The Model FA5000 meets the performance requirements of ED
−
112, chapter 2, and Part
I, while conforming to the input interface required in ARINC 757/757A.
3.
Physical Characteristics
The Model FA5000 fit within the envelope of a trayless short case. (Refer to Figure 801)
for outline and dimension illustration. Following are the physical characteristics of the
Model FA5000s:
Size:
Height:
Width:
Depth:
6.58 inches nominal
4.88 inches nominal
11.9 inches nominal
Weight1:
8.4 pounds Max.
Markings:
International Orange, Reflective Striping on Crash
Survivable Memory Unit, English Markings and
French Markings
Main (Rear) Connector:
55-Pin Connector Compatible with MIL
−
STD 38999
Part Number 063
−
98
−
03504
(Amphenol Part Number 10
−
565998
−
198N)
Main (Rear) Mating
Connectors:
Crimp: Part Number 063–98–03507
(Cannon Part Number MS27473 E 16F 35S)
Solder: Part Number MS27336T16A35S
Ground Support
Equipment Connector J2:
Ethernet RJ45
1
Weight is with Underwater Locator Beacon installed.
Rev. 06 Page 801
Mar. 16/16
The document reference is online, please check the correspondence between the online documentation and the printed version.
