COMPONENT MAINTENANCE MANUAL
AVIATION RECORDERS
Model FA5000
Initial Issue Page 704
Sep. 30/11
Assembly
23–70–40
Use or disclosure of information on this sheet is subject to
the restrictions on the cover page of this document.
(4)
Install the one cover (1
−
60), screw (1
−
65), spacer (1
−
70) and two springs
(1
−
75) used to secure the top half Ethernet connector J
−
2 to the front part of
the Shielded Housing (1
−
5). Tighten screw to a torque value of 2
−
3 in./lbs.
(5)
Install the two screws (1
−
135) used to secure the Seal Pad (1
−
140) and the
CSMU cable (1
−
120) connector to the MP PWA (1
−
50). Tighten screws to a
torque value of 5-6 in./lbs.
(6)
Install CSMU cable cover plate (1-110) and secure using the two screws
(1
−
115). Tighten screws to a torque value of 5-6 in./lbs.
(7)
Connect the RIPS cable (1
−
85) at P
−
5 on the MP PWA (1
−
50).
(8)
Connect the Hold
−
up Capacitor cables at J
−
6 (RED) and J
−
7 (BLACK) on the
MP PWA (1
−
50).
(9)
Install the rear cover (1
−
10) as described in Paragraph E, Rear Cover Installa-
tion.
The document reference is online, please check the correspondence between the online documentation and the printed version.
