4
1.
PARTS NAMES & PRINCIPAL FUNCTIONS
1-1
FRONT PANEL
A)
Indicator ...............................• Indicates measured values, selected functions, and set values.
• Normally, it indicates measured values responding to the output from the
transducer. However, if error occurs, the following appears.
OFL1:
When measured value is exceeding the measuring range to the
minus side.
OFL2:
When measured value is exceeding the measuring range to the
plus side.
OFL3: When the indicated value is below -19999.
OFL4: When the indicated value is above +19999.
B)
Unit Label
C) [LOCK] LED .......................• When this LED is lit or flickering, no functions are set. Always turn OFF the
[LOCK] LED before setting functions.
D) [HIGH] Limit LED ..............• Lights up when the measured value exceeds the high limit value.
• Flickers when high limit value is indicated.
E) [LOW] Limit LED ...............• Lights up when the measured value is less than the low limit value.
• Flickers when low limit value is indicated.
F) Operation Key ......................• A pushbutton switch to operate the WGA-670B.
For operation, see “4 OPERATION & FUNCTIONS.”
E
D
A
B
F
C
Summary of Contents for WGA-670B
Page 3: ......
Page 56: ...51 9 2 OUTSIDE DRAWING 1 With No Option WGA 670B 0 ...
Page 57: ...52 2 With BCD Option WGA 670B 1 ...
