41
f) Return value of hold mode
a, b, c,x.xx,yy.yy<CR><LF>
Specified (second)
Delay time (second)
Comparison mode
Display mode
Hold mode
• See SMF command.
g)
Return value of auto-ZERO compensation set value
xxxxxx,y.y.z<CR><LF>
ZERO near ZERO range
Definition time
Indicates ZERO range and indicated value with a decimal point. If the indicated
value has no decimal point, it is filled with ‘0’ from the head.
h)
Optional return values
• Outputs the following according to the installed options.
01:
a,b,c<CR><LF>:
BCD
02:
<CR><LF>:
RS-232C+TEDS
04:
±xxxxxx,
±yyyyyy<CR><LF>: Analog
output
• When multiple options are installed, the required return values are outputted according to the multiple
options.
Contents of parameters are described in the following.
a:
BCD Data output logic
b:
BCD
EOC
output
logic
c:
BCD Number of output times
±xxxxxx:
Indicated value at 0 V analog output
±yyyyyy:
Indicated value at 10 V analog output
(9) [GOD]
Contents:
Indicates the original value. (Relevant to panel operation F-01)
Format: GOD<CR>
Parameter: None
Return value format:
D0±0x.xxx<CR><LF>
Description & others:
Return value ±0x.xxx is input value with unit mV/V.
(10) [VCL]
Contents:
Conducts actual load calibration (Relevant to panel operation F-02)
Format: VCL±xxxxxx<CR>
Parameter: ±xxxxxx
Indicates the indicated value with a decimal point. If the
indicated value has no decimal point, it is filled with ‘0’ from
the head.
Return value format:
ok<CR><LF>
When error occurs, E-00<CR><LF>
Description & others:
Saves the results of this command.
Summary of Contents for WGA-670B
Page 3: ......
Page 56: ...51 9 2 OUTSIDE DRAWING 1 With No Option WGA 670B 0 ...
Page 57: ...52 2 With BCD Option WGA 670B 1 ...
