KEW6305
6.6
6.2 Selecting/changing the display screen
The display screens are classified as follows. The following table is also used in section “
6-3
Customizing the display”
.
Screen A
Screen B
Screen C
Screen D
Screen E
Screen F
Screen G
Screen 1
Screen
1-A
Screen
1-B
Screen
1-C
Screen
1-D
－
－
－
Screen 2
Screen
2-A
Screen
2-B
Screen
2-C
Screen
2-D
－
－
－
Screen 3
Screen
3-A
Screen
3-B
Screen
3-C
Screen
3-D
Screen
3-E
Screen
3-F
Screen
3-G
* In case of single-phase 2-wire (1ch), the following screens do not appear:
1-B, 1-C, 1-D, 2-B, 2-C, 2-D
* In case of single-phase 2-wire (2ch), single-phase 3-wire, and three-phase 3-wire, the
following screens do not appear:
1-D and 2-D
●
Selecting the display screens
Upon turning the Function Switch from “OFF” to
W
range, Screen 1-A is displayed. Use the
Cursor
keys to select other screens.
Selects from Screen A to G.
Selects from Screen 1 to 3.
NOTE
Turning off the instrument or changing the wiring configuration (“
Setting 01
”) on
SET UP
range
returns screen 1-A.
www.
GlobalTestSupply
.com
Find Quality Products Online at:
