7
KEW6305
CAUTION
● Caution should be taken since conductors under test may b
e hot.
● Never apply currents or voltages exceeding the maximum allowable input for the instrument for a
long time.
●
Do not apply currents or voltages for the Voltage test leads or Clamp sensors while the instrument
is off.
● Don’t use the instrument at d
usty places or to be spattered.
● Don’t use the instrument under a strong electric storm or in the vicinity of energi
zed object.
● Never give strong vibrations or drop shocks.
●
While using a SD card, do not replace or remove the card. (
symbol blinks while accessing
SD card.)
Otherwise, the saved data in the card may be lost or the instrument may be damaged.
- Clamp sensor -
● Do not bend or pull the cable of the Clamp sensor.
- Treatment after use -
● Power off the instru
ment and disconnect the Power cord, Voltage test leads and Clamp sensors
from the instrument.
● Remove the batteries
if the instrument is to be stored and will not be in use for a long period.
● Remove the
SD card when carrying the instrument.
● Never gi
ve strong vibrations or drop shocks when carrying the instrument.
● Do not expose the instrument to direct sunlight,
high temperatures, humidity or dew.
● Use a damp cloth with neutral detergent
or water for cleaning the instrument. Do not use
abrasives or solvents.
● Do not store the instrument if it is wet.
Carefully read and follow the instructions:
DANGER,
WARNING
,
CAUTION
and
NOTE ( )
described in each section.
The following symbols are used in this manual:
User must refer to the explanations in the instruction
manual.
Instrument with double or reinforced insulation
AC
(Functional) Earth terminal
This instrument satisfies the marking requirement
defined in the WEEE Directive (2002/96/EC). This
symbol indicates separate collection for electrical and
electronic equipment.
～
www.
GlobalTestSupply
.com
Find Quality Products Online at:
