1.3
KEW6305
1.2 Features
This is a digital Power Clamp Meter that can be used for various wiring systems. Measured data can be
saved either in the internal memory or SD card, and can be transmitted to PC via USB connection or by
using SD card reader.
Safety Construction
Designed to meet the international safety standard IEC 61010-1 CAT.III 600V.
Wiring configuration
KEW6305 supports: Single-phase 2-wire, Single-phase 3-wire, Three-phase 3-wire, Three-phase
4-wire.
Measurement and calculation
KEW6305 measures voltage (RMS), current (RMS), active power, frequency and calculates reactive/
apparent power, power factor, neutral current and active/ reactive/ apparent energy.
Demand measurement
Electricity consumption can be easily monitored so as not to exceed the target maximum demand
values.
Saving data
KEW6305 is endowed with a logging function with a preset recording interval. Data can be saved by
manual operation or at pre-set time & date.
Dual power supply system
KEW6305 operates either with an AC power supply or with batteries. Both dry-cell batteries (alkaline)
and rechargeable batteries (Ni-MH) can be used. In the event of an interruption, while operating with
an AC power supply, power to the instrument is automatically restored by the batteries in the instrument.
Large display
Up to 3 measured items can be displayed on the large screen simultaneously.
Light & compact design
Clamp sensor type, compact and light weight design
Application
Data in the internal memory and in SD card can be transmitted to PC using USB connection or SD
slot. The supplied PC software application enables easy settings of the instrument and analysis of
the saved data from PC.
www.
GlobalTestSupply
.com
Find Quality Products Online at:
