7.13
KEW6305
7.6 Displayed Digits/ Over-range indication
●
Digits
*
Active electrical energy WP, Apparent electrical energy WS
(auto-range)
: WP1/WP2/WP3, WS1/WS2/WS3 (each phase), max 6 digits
: WP, WS (total), max 6 digits
The range is automatically assigned depending on the measured value.
The decimal point and unit are changed automatically.
Unit: Wh/ VAh
When the value exceeds 999999G, segment
becomes “
“.
However the saved data is not lost.
0.0000 -
99..9999
100.000 -
999.999
1000.00 -
9999.99
10.0000 k
-
99.9999 k
100.000 k
-
999.999 k
1000.00 k
-
9999.99 k
10000.0 k
-
99999.9 k
100000 k
-
999999 k
1000.00 M
-
9999.99 M
10000.0 M
-
99999.9 M
100000 M
-
999999 M
1000.00 G
-
9999.99 G
10000.0 G
-
99999.9 G
100000 G
-
999999 G
* Elapsed time
TIME
Displayed time changes with time as follows.
Elapsed time
00:00:00
~
99:59:59
hour: minute: second
100
~
999999
hour
●
Over-range indication/ others
* When the input voltage and the current exceeds the max display counts,
or
mark is
displayed on the LCD. In this case, accurate measurement cannot be made.
* On the
W
range, when the P (active power) is shown by bars “- - - -”, this means that the increment
in electrical energy is insignificant.
Refer to “
6-5-2 Over-range indication/ Bar indication
” in this manual.
www.
GlobalTestSupply
.com
Find Quality Products Online at:
