Kyocera TASKalfa 3501i, Operation Manual

Page: 94 / 554

2-34
Installing and Setting up the Machine > Command Center RX
Accessing Command Center RX
1
Display the screen.
1
Launch your Web browser.
2
In the address or location bar, enter the machine's IP address or the host name.
Examples: https://192.168.48.21/ (for IP address)
https://MFP001 (if the host name is "MFP001")
The web page displays basic information about the machine and Command Center RX as well
as their current status.
2
Configure the function.
Select a category from the navigation bar on the left of the screen. When you log in to the
machine as an administrator, you will see [
Device Settings ], [ Function Settings ],
[ Network Settings ], [ Security Settings ], and [ Management Settings ].
NOTE
When connecting to Command Center RX, a message may appear that reads "There is a
problem with the security certificate of this website". To prevent this message appearing,
install the device certificates of the machine to the Web browser. For details, refer to
Command Center RX User Guide .