manualshive.com logo in svg

Kyocera TASKalfa 3501i, Operation Manual

Share
Download
Kyocera TASKalfa 3501i Operation Manual Download Page 465

10-25

Troubleshooting > Troubleshooting

Cannot offset this 
paper.

*

Did you select a paper size/type 
that cannot be offset?

If the selected paper is not changed 
and [Continue] is pressed, offset is 
released.
Select the available paper. Press 
[Continue] to print.

page 6-17

Cannot perform remote 
printing.

—

Remote printing is prohibited.
The job is canceled. Press [End].

page 8-27

Cannot print the 
specified number of 
copies.

*

—

Only one copy is available. Press 
[Continue] to continue printing. 
Press [Cancel] to cancel the job.

—

Cannot process this 
job.

*

―

Restricted by Authorization settings. 
The job is canceled. Press [End].

―

―

Restricted by Job Accounting. The 
job is canceled. Press [End].

page 9-29

Cannot punch at the 
specified position.

Have you selected a position that 
cannot be punched?

If the selected paper is not changed 
and [Continue] is pressed, punch is 
released.
Select the available paper. Press 
[Continue] to print.

page 6-19

Cannot punch this 
paper.

Did you select a paper size/type 
that cannot be punched?

If the selected paper is not changed 
and [Continue] is pressed, punch is 
released.
Select the available paper. Press 
[Continue] to print.

page 6-19

Cannot staple at the 
specified position.

Have you selected a position that 
cannot be stapled?

If the selected paper is not changed 
and [Continue] is pressed, staple is 
released.
Select the available paper. Press 
[Continue] to print.

page 6-18

Cannot staple this 
paper.

*

Did you select a paper size/type 
that cannot be stapled?

If the selected paper is not changed 
and [Continue] is pressed, staple is 
released.
Select the available paper. Press 
[Continue] to print.

page 6-18

Cannot use ##### due to 
a failure.

―

Call service.

―

Check the document 
processor.

Is the top cover of the document 
processor open?

Close the document processor 
cover.

―

Is the document processor open?

Close the document processor.

―

Check the main unit 
right tray.

Is the main unit right tray closed?

Open the main unit right tray.

—

Is the acceptable storage capacity 
exceeded?

Remove the paper. Printing then 
resumes.

—

Check the paper in the 
multi purpose tray.

—

The paper size is different. Set 
selected size paper and press 
[Continue].

page 3-34

Check the side feeder.

—

The side feeder is not installed 
correctly. Attach the side feeder.

—

Message

Checkpoints

Corrective Actions

Reference 

Page

Summary of Contents for TASKalfa 3501i











































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands