Kyocera TASKalfa 3500i, Service Manual

Page: 602 / 837

2LL/2LJ/2LH
2-4-10
Page length L5 Page length (integer value) 10
L6 Page length (decimal value) 61
Page width L7 Page width (integer value) 8
L8 Page width (decimal value) 11
Duplex mode N4 0: Off
1: Long edge binding
2: Short edge binding 0
Sleep timer time-out time N5 Value in units of 1 minute (1 to 240) 35 ppm: 45
45/55 ppm: 60
Ecoprint level N6 0: Off
2: On 0
Default emulation mode P1 6: PCL 6
9: KPDL 120V: 9
220-240V: 6
Carriage-return action P2 0: Ignores
1: Carriage-return
2: Carriage- linefeed 1
Linefeed action P3 0: Ignores
1: Linefeed
2: Li carriage-return 1
Automatic emulation switching P4 0: AES disabled
1: AES enabled 120V: 1
220-240V: 0
Alternative emulation P5 Same as the P1 values except that 9 is
ignored. 6
Automatic emulation switching
trigger P7 0: Page eject commands
1: None
2: Page eject and prescribe EXIT commands
3: Prescribe EXIT commands
4: Formfeed (^L) commands
6: Pescribe EXIT and formfeed commands
10: Page eject commands; if AES fails,
resolves to KPDL
120V: 11
220-240V: 10
Command recognition character P9 ASCII code of 33 to 126 82 (R)
Default stacker R0 1 (inner tray) 1
Item FRPO Setting values
Factory
setting