Kyocera TASKalfa 3500i, Service Manual

Page: 192 / 837

2LL/2LJ/2LH-1
1-3-68
U106 Setting the voltage for the secondary transfer
Description
Sets the control voltage for the secondary transfer depending on each paper type.
Purpose
To change the setting when any density problems, such as too dark or light, occur.
Method
1. Press the start key.
2. Select the item to be set.
Setting: [Light/Normal1]
1. Select the item to be set.
2. Select the paper width to be set.
3. Change the value using the +/- or numeric keys.
[1st]
[2nd]
4. Press the start key. The value is set.
Item No. Description
Display Description
Light/Normal1 Control voltage for the transfer bias on paper with thickness
52 g/m
2
to 64 g/m
2
and 65 g/m
2
to 75 g/m
2
Normal2/3 Control voltage for the transfer bias on paper with thickness
76 g/m
2
to 105 g/m
2
Heavy1-3 Control voltage for the transfer bias on paper with thickness
106 g/m
2
to 220 g/m
2
Heavy4/5 Control voltage for the transfer bias on paper with thickness
221 g/m
2
to 300 g/m
2
OHP Control voltage for the transfer bias for transparencies
Bias Transfer bias value
Display Description
1st Control voltage for the transfer bias for the first side (full speed)
2nd Control voltage for the transfer bias for the second side (full speed)
Display Description
Setting
range
Initial setting
35ppm 45ppm 55ppm
Width=105 105 mm wide 0 to 255 150 174 146
Width=210 210 mm wide 0 to 255 143 165 140
Width=297 297 mm wide 0 to 255 139 157 134
Display Description
Setting
range
Initial setting
35ppm 45ppm 55ppm
Width=105 105 mm wide 0 to 255 146 160 133
Width=210 210 mm wide 0 to 255 139 153 130
Width=297 297 mm wide 0 to 255 124 135 120