Kyocera FS-C1020MFP+ Operation Manual Download Page 53

Page: 53 / 444

21.

Apply the indicated sticker as in the illustration below.

CES259

Turning the Power on

This section describes how to turn on the machine.

• Do not use any power sources other than those that match the specifications shown in this

manual. Doing so could result in fire or electric shock.

• Do not use any frequencies other than those that match the specifications shown. Doing so could

result in fire or electric shock.

• Do not use multi-socket adaptors. Doing so could result in fire or electric shock.

• Do not use extension cords. Doing so could result in fire or electric shock.

• Do not use power cords that are damaged, broken, or modified. Also, do not use power cords

that have been trapped under heavy objects, pulled hard, or bent severely. Doing so could
result in fire or electric shock.

• Touching the prongs of the power cable's plug with anything metallic constitutes a fire and

electric shock hazard.

2. Getting Started

Summary of Contents for FS-C1020MFP+





























































































































































































































































































































































































































































Search results

Summary of Contents for FS-C1020MFP+

Reviews:

Brands by name

Popular brands

Kyocera FS-C1020MFP+, Operation Manual

Search results

Summary of Contents for FS-C1020MFP+

Reviews:

Brands by name

Popular brands