manualshive.com logo in svg

Kyocera FS-C1020MFP+, Operation Manual

Share
Download
Kyocera FS-C1020MFP+ Operation Manual Download Page 215

• Press the [Escape] key to discard the current change and return to the initial screen.
• You can change the machine's default [Resolution] setting to always scan with a specific resolution

level.

• The "Photo" resolution is not available for Internet Faxes. Faxes will be sent using "Detail" resolution

if "Photo" resolution has been specified.

• Temporary job settings are cleared in the following cases:

• When no input is received for the period of time specified in [System Auto Reset Timer] while

the initial screen is displayed.

• When the [Clear/Stop] key is pressed while the initial screen is displayed.
• When the machine's mode is changed.
• When the power is turned off.
• When the machine's default for the same setting is changed.

• For details about [Resolution], see p.254 "Fax Transmission Settings".
• For details about [System Auto Reset Timer], see p.287 "Administrator Settings".

6. Using the Fax Function

214

Summary of Contents for FS-C1020MFP+





























































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands