Kyocera FS-C1020MFP+ Operation Manual Download Page 357

Page: 357 / 444

Carefully remove any paper that is jammed under the transfer unit.

CER046

If you cannot find the jammed paper, look inside the machine.

Using both hands, carefully push up the front cover until it closes.

CES142

• When closing the front cover, push the upper area of the cover firmly. After closing the cover,

check that the error is cleared.

Removing Scanning Jams

If a paper jam occurs in the ADF, one of the following messages appears on the screen:

• "ADF Original Misfeed Open ADF Cover and Remove paper."
• "Misfeed: Tray 1"
• "Misfeed: Tray 2"

Follow the procedure below to remove the original jammed in the ADF.

9. Troubleshooting

356

Summary of Contents for FS-C1020MFP+





























































































































































































































































































































































































































































Search results

Summary of Contents for FS-C1020MFP+

Reviews:

Brands by name

Popular brands

Kyocera FS-C1020MFP+, Operation Manual

Search results

Summary of Contents for FS-C1020MFP+

Reviews:

Brands by name

Popular brands