Kyocera FS-C1020MFP+ Operation Manual Download Page 406

Page: 406 / 444

Pull the opening lever on the front cover, and then carefully lower the front cover.

CES141

Be sure to set the registration roller in the position shown by the arrow in the illustration below.

CES089

Clean the registration roller if prints are smeared after a paper jam is cleared.

Clean the registration roller by applying a soft damp cloth while turning it.

Using both hands, carefully push up the front cover until it closes.

CES142

10.

Plug in the power cord securely. Connect all the interface cables that were removed.

11.

Turn on the power.

• When closing the front cover, push the upper area of the cover firmly.

Cleaning

405

Summary of Contents for FS-C1020MFP+





























































































































































































































































































































































































































































Search results

Summary of Contents for FS-C1020MFP+

Reviews:

Brands by name

Popular brands

Kyocera FS-C1020MFP+, Operation Manual

Search results

Summary of Contents for FS-C1020MFP+

Reviews:

Brands by name

Popular brands