Kyocera FS-C1020MFP+ Operation Manual Download Page 204

Page: 204 / 444

• The "Photo" resolution is not available for Internet Faxes. Faxes will be sent using "Detail" resolution

if "Photo" resolution has been specified.

• If the faxes are received on a computer, a viewer application needs to be installed in order to view

the documents.

• For details about network settings, see p.320 "Configuring the Network Settings".

Basic Operation for Sending a Fax

This section describes the basic operation for sending a fax.

• The original in the ADF takes precedence over the original on the exposure glass if you place

originals both in the ADF and on the exposure glass.

Press the [Facsimile] key.

CES176

Place the original on the exposure glass or in the ADF.

If necessary, configure the advanced scan settings.

Enter the fax number (up to 40 characters) using the number keys, or specify a
destination using the One Touch buttons or Speed Dial function.

• If the machine is connected to the telephone network through a PBX, make sure to enter the

outside line access number specified in [PBX Access Number] before the fax number.

• To specify an Internet Fax destination, use the One Touch buttons or Speed Dial function.

Sending a Fax

203

Summary of Contents for FS-C1020MFP+





























































































































































































































































































































































































































































Search results

Summary of Contents for FS-C1020MFP+

Reviews:

Brands by name

Popular brands

Kyocera FS-C1020MFP+, Operation Manual

Search results

Summary of Contents for FS-C1020MFP+

Reviews:

Brands by name

Popular brands