manualshive.com logo in svg

Kyocera FS-C1020MFP+, Operation Manual

Share
Download
Kyocera FS-C1020MFP+ Operation Manual Download Page 163

CES128

Use this procedure to set the machine to make 2-sided copies.

1.

Press the [Copy] key.

CES174

2.

Press the [ ][ ] keys.

CES168

3.

Press the [ ][ ] keys to select [2 Sided Copy], and then press the [OK] key.

4.

Press the [ ][ ] keys to select the binding method and orientation, and then press the
[OK] key.

5.

Press the [User Tools] key to return to the initial screen.

"2 Sided Copy" appears on the display, indicating that the machine is now in 2-sided copy mode.

• You can press the [Escape] key to exit to the previous level of the menu tree.
• After this function is set, all subsequent copies will be 2-sided, unless you cancel the setting by

selecting [Off] for [2 Sided Copy].

4. Using the Copier Function

162

Summary of Contents for FS-C1020MFP+





























































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands