Kyocera FS-C1020MFP+ Operation Manual Download Page 21

Page: 21 / 444

Printing confidential documents

1. Use the printer driver to send a print job as a Locked Print file from a computer.

For details, see p.139 "Storing a Locked Print file".

2. Enter the password using the control panel to print the file.

For details, see p.140 "Printing a Locked Print file".

Using the Machine as a Copier

This section describes some useful functions of this machine when used as a copier.

Making enlarged or reduced copies

This machine has preset ratios for scaling originals, to make it easy to convert documents between
different standard sizes.

CES103

Preparation for making enlarged or reduced copies

To always enlarge or reduce copies:

1. Configure the machine's default [Reduce/Enlarge] setting.

For details, see p.245 "Copy Settings".

To use this function for the current job only:

1. Configure the setting using the [Reduce/Enlarge] key before starting the current job.

For details, see p.154 "Making Enlarged or Reduced Copies".

Copying multiple pages onto a single sheet of paper

You can copy multiple pages of an original onto a single sheet of paper.

• This function is only available when the original is set in the ADF, not when it is set on the exposure

glass.

1. Guide to the Machine

Summary of Contents for FS-C1020MFP+





























































































































































































































































































































































































































































Search results

Summary of Contents for FS-C1020MFP+

Reviews:

Brands by name

Popular brands

Kyocera FS-C1020MFP+, Operation Manual

Search results

Summary of Contents for FS-C1020MFP+

Reviews:

Brands by name

Popular brands