Kyocera DISCOVER FS-3830N, Operation Manual

Page: 43 / 227

Paper Handling
1-27
Selecting the Unit of Measurement
Then, use the following procedure to set the unit of measurement.
1
Press the
>
key.
2
Press the or key repeatedly until
>>Unit
appears. The unit of
measurement can be selected between millimeters and inches. The
current unit of measurement is displayed (the default setting is
mm
).
3
Press the
ENTER
key. A blinking question mark (
?
) appears.
4
Select
mm
or
inch
using the or key.
5
Press the
ENTER
key.
Set the dimensions of paper as described in the next section.
Entering the Width and Length
Then, use the following procedure to set the paper size.
>>Unit
mm
>>Unit
? mm
Enter the paper size for
X Dimension
and
Y Dimension
as
shown in the figure.
X Dimension
Y Dime
nsion
148 to 216 mm
(5.83 to 8.5 inches)
210
to
356
mm
(8.27 to
1
4.02 inch
es)