Kyocera DISCOVER FS-3830N, Operation Manual

Page: 116 / 227

Configuration
1-100
Sleep Timer Setting
The printer has a sleep timer to conserve power when the printer is not
printing, processing, or receiving data. You can adjust the timer value, the
length of time the printer waits before entering sleeping mode in the
absence of data.
1
Press the
MENU
key.
2
Press the or key repeatedly until
Others >
appears.
3
Press the
>
key.
4
Press the or key repeatedly until
>Sleep Timer >
appears.
The default setting is
015 min
.
5
Press the
ENTER
key. A blinking cursor (
_
) appears.
6
Press the or key to increase or decrease the value of the figure
where the cursor is blinking and set the desired time. The timer can
be set between
5
and
240 min
, in 5-minute increments. You can use
the
>
and
<
keys to move the cursor right and left.
7
Press the
ENTER
key.
8
Press the
MENU
key. The message display returns to
Ready
.
Others >
>Sleep Timer >
015 min.
>Sleep Timer
015 min.