Kyocera DISCOVER FS-3830N, Operation Manual

Page: 115 / 227

Configuration
1-99
Automatic Form Feed Timeout
When the printer receives no data for a certain time, it time out and
releases the current interface: it prints whatever data it has in its buffer
and feeds out the page. You can adjust the time-out time as follows:
1
Press the
MENU
key.
2
Press the or key repeatedly until
Others >
appears.
3
Press the
>
key.
4
Press the or key repeatedly until
>Form Feed Time
appears.
The default setting is 30 seconds.
5
Press the ENTER key. A blinking cursor ( ) appears.
6
Press the or key to increase or decrease the value of the figure
where the cursor is blinking and set the desired time. The time can
be set between
0
and
495
seconds, in 5-second increments. You can
use the
>
and
<
keys to move the cursor right and left.
7
Display the desired time and press the
ENTER
key.
8
Press the
MENU
key. The message display returns to
Ready
.
Others >
>Form Feed
Time Out 030sec.
>Form Feed Time.
Time Out 030sec.