Connection
36
5.7 Power Terminal Block
There is a power terminal block on the rear panel of the device. You
need to connect the power wires to the terminal block to provide
power to the device. The device supports single (PWR1) and redun-
dant (PWR1 and PWR2) power supply with a 5-pin 5.08mm-spacing
plug-in terminal block. When the redundant power supply is used and
one power input is faulty, the device can continue operating properly,
thereby improving network reliability.
The following figure shows the 5-pin 5.08mm-spacing plug-in terminal
block.
Note:
0.75mm
2
<Cross-sectional area of the power wire<2.5mm
2
;
grounding resistance<5
Ω
.
ƽ
5-Pin 5.08mm-Spacing Plug-in Terminal Block
Figure 37 5-Pin 5.08mm-Spacing Plug-in Terminal Block (socket)
+/L
+/L
-/N
-/N
PWR1
1 2 3 4 5
PWR2
Summary of Contents for SICOM3000GPT
