Switch Access
47
7.2 Access through Telnet
7.3 Access through Web
Step 1:Connect the network port of a PC to the Ethernet port of the
switch with a network cable.
Step 2:Enter the IP address of the device in the address box of the
browser. The user login interface is displayed. You can log in to the
Web UI by default user name "admin" and password "123".
Step 3:Click OK. The Telnet CLI is displayed. Then you can run the
commands in Table 15 to perform operations.
Figure 43 Access through Telnet
Note:
ƽ
IE8.0 or a later version is recommended.
ƽ
For details about how to access the device and other operations,
refer to the Web operation manual in the delivered CD.
Step 1:Connect the network port of a PC to the Ethernet port of the
switch with a network cable.
Step 2:On the Windows desktop, click Start and Run. The Run dialog
box is displayed. Enter "telnet
IP address
". For example, if the IP
address of the serial port module is 192.168.0.2 (default IP address
of the device), enter "telnet 192.168.0.2" in the dialog box.
Summary of Contents for SICOM3000GPT
