Screw holes for securing the
mounting bracket to a switch
Screw holes for securing the
mounting bracket to a rack post
Switch Installation
20
4.2 Mounting Modes and Steps
Figure 19 Mounting Bracket
The series switches support rack mounting by front/rear panel. The
following uses mounting by front panel as an example to describe
mounting steps. The steps for mounting by rear panel are similar to
those for mounting by front panel. Before installation, make sure that
the following requirements are met.
1) Environment: temperature (-40
ć
to 85
ć
), ambient relative humid-
ity (5% to 95%, non-condensing)
2) Power requirement: The power input is within the voltage range of
the switch.
3) Grounding resistance: <5
Ω
4) No direct sunlight, distant from heat source and areas with strong
electromagnetic interference.
ƽ
Installing Mounting Brackets
The mounting brackets for this series switches support two mounting
positions, as indicated by the two dashed boxes in the following
figure. You can select either of the mounting positions as needed.
Summary of Contents for SICOM3000GPT
