Connection
29
An SFP optical module is equipped with LC connector, and each port
consists of a TX (transmit) port and an RX (receive) port. To enable
communication between Device A and Device B, connect the TX port
of Device A to the RX port of Device B, and the RX port of Device A
to the TX port of Device B, as shown in the following figure.
Figure 27 Gigabit SFP Optical Module
Figure 28 Fiber Connection of an SFP Optical Module
5.4.1 Gigabit SFP Optical Module
Device A
LC-port
Device B
LC-port
LC-LC cable
Wiring sequence
TX
RX
TX
RX
TX
RX
TX
RX
Summary of Contents for SICOM3000GPT
