Connection
23
10/100Base-T(X) Ethernet port is equipped with RJ45 connector.
The port is self-adaptive. It can automatically configure itself to work
in 10M or 100M state, full or half duplex mode. The port can also
adapt to MDI or MDI-X connection automatically. You can connect
the port to a terminal or network device with a straight-through or
cross-over cable.
The following figure shows the pin numbers of the RJ45 port.
The following table lists the pin definitions of the 10/100Base-T(X)
Ethernet port.
5 Connection
5.1 10/100Base-T(X) Ethernet Port
Figure 22 RJ45 Port
Table 6 Pin Definitions of 10/100Base-T(X) Ethernet Port
ƽ
Pin Definition
Pin
MDI-X Signal
MDI Signal
1
Receive Data+ (RD+)
Transmit Data+ (TD+)
2
Receive Data- (RD-)
Transmit Data- (TD-)
3
Transmit Data+ (TD+)
Receive Data+ (RD+)
6
Transmit Data- (TD-)
Receive Data- (RD-)
4, 5, 7, 8 Unused
Unused
Note:
"+" and "-" indicate level polarities.
Summary of Contents for SICOM3000GPT
