Connection
35
Figure 36 Grounding
Grounding protects the switch from lightning and interference. There-
fore, you must ground the switch properly. You need to ground the
switch before it is powered on and disconnect the grounding cable
after the switch is powered off.
The switch provides a grounding screw on the rear panel for chassis
grounding. After crimping one end of the grounding cable to a cold
pressed terminal, secure the end to the grounding screw and connect
the other end to the earth firmly.
5.6 Grounding
GND
Note:
Cross-sectional area of the chassis grounding cable>2.5mm
2
;
grounding resistance<5
Ω
.
Summary of Contents for SICOM3000GPT
