56 Chapter 11 – Memory management
10911 V01.10
The device suggests a file name that might stand for a system (measuring location), for example. This can be changed
in alphanumeric format using the arrow keys or the numeric keypad and the
←
and
→
keys. Press
ENTER
to complete
the entry. The entered name is identical to the file name of the “mem” file. If a file with the same name already exists,
you will receive a warning. Enter a different name by pressing
ESC
, or press
ENTER
to overwrite the existing file. The
next section describes how to import a tuning memory.
11.3.7 Memory import
Use this function to import an existing tuning memory as a “mem” file from a USB memory device onto the device.
Access via
MODE
> Memory > Import memory. A selection screen appears with all saved “mem” files. Use the Up/Down
arrow keys to move the cursor to the desired file. Press ENTER to overwrite the current tuning memory of the device
with the data from the “mem” file. The name of the selected “mem” file is saved in the device as a system name and
displayed in the header of the Save menu.
This name is suggested as a file name during the next measurement.
Note:
Any other general settings by the user, such as LNB oscillator frequencies for RF inputs or the UB centre
frequency for UNICABLE or JESS, are not transferred with the memory. These may have to be adjusted
manually.
Summary of Contents for VAROS109
Page 1: ...VAROS109 Digital satellite measuring receiver Manual ...
Page 2: ......