KWS VAROS109, Manual, Page: 44 / 78

42 Chapter 08 – SCAN support for satellite discovery
10911 V01.10
Chapter 08
SCAN support for satellite discovery
Several Functions are gathered together in the
SCAN
-function which makes looking and identifying a satellite position
easier. As soon as the SCAN function is selected, a submenu will appear where the following functions can be selected:
ANALYZER; SAT SCAN; SAT List.
A spectral illustration appears on the screen as soon as the analyzer is activated and then it switches to the input con-
nector from the LNB-supply 18V/22kHz. The SCAN function from the analyzer mode is in the chapter
„ANALYZER“ -
changing over into the measurement mode is described in „SCAN“.
8.1 SAT SCAN
This function can be choosen from the above displayed menu with the keys
SCAN
or
ENTER
. A search cycle starts in a
range from east to west where the most important satellites are tuned to the transponder. The positions that are being
tested will be shown in a distinct red window and a reference ”searching for position“ will be shown in the MPEG win-
dow. If the satellite system can be clearly identified out of this data stream, the adjusted position will be shown in the
MPEG-window with the level specification (view picture). The search cycle can be continued with SCAN, discontinued
with ESC, switched to analyzer mode with
ANALYZ
and changed into regular measurement mode with
ENTER
.