3.4
Set Data Outputs Mode
The Set Data Outputs function is used to select several types of
data formats available in the GyroTrac. The message formats are:
•
1 sine/cosine (either 4-wire or B&G 3-wire)
•
3 serial message formats:
- NMEA 0183
- KVH pitch, roll, and yaw, and
- Cetrek
•
1 Furuno AD10S
These messages are output to displays and external navigation
systems only if selected via the ADCU. Selection procedures are
presented in the following sections.
54-0161
68
TracVision G6 Technical Manual
Set sine-cos levels?
Yes
Next
Return
Set serial outputs?
Yes
Next
Return
Setup data outputs?
Enter
Next
Return
Set Furuno outputs?
Yes
Next
Return
ALERT SCREENS
Figure 3-10
Data Outputs Mode
Menu Sequence
For more details about the available
data outputs, refer to Appendix F,
“Data Outputs” on page 141.
