4. Repeat Step 3 for each of the following
transponder categories:
•
vertical high
•
vertical low
•
horizontal high
•
horizontal low
or
•
right
•
left
TracVision G6 requires that the data fields for all
transponder categories be provided. If the selected
satellite does not have information for one or more of
the transponder categories, default information should
be entered in the fields as follows:
Transponder Data
Default Value
Frequency
00000
Symbol Rate
27500
FEC Code
the same value as provided for those
transponders with data
Network ID
0x0000
Polarity and Band
whichever combinations are not
already provided
5. After entering all of the necessary information,
save the settings by typing
@SAVE,A
(or B if the
data is for satellite User 2).
6. Type
@DEBUGOFF
to exit the DEBUG mode.
7. Type
ZAP
to restart the antenna.
One of your user-defined satellite options has now been added to
the TracVision G6 satellite library. This option will now be
available as USER1 the next time the Install Satellite menu is
accessed. If you need to configure a second user-defined satellite,
repeat this procedure starting with Step 1 to enter data for the
USER2 satellite.
To configure the system to track your user-defined satellite(s),
follow the steps in “Installing Your Selected Satellites” on
page 47.
54-0161
52
TracVision G6 Technical Manual
Table 2-13
Satellite Transponder
Default Data
