Installing the Camera and In-Car Microphone (ICM)
Manual Part Number:
006-1219-00 Rev. 0
3–13
Digital Eyewitness
®
HD
In-Car Video System
4. Secure the connection using a couple of wraps of electrical tape. Just use enough tape
to secure the connection.
Figure 3-18.
Inline Camera Connection Secured with Electrical Tape
5. Align the holes in the camera with the holes in the camera bracket.
IMPORTANT
The camera should be positioned so that the cable attachment at
the camera is on top when the camera is installed.
6. Loosely install the screws that will secure the camera to the bracket.
7. Once both screws have been started, adjust the final position of the camera and tighten
the screws.
8. Route the cable to the DVR.
IMPORTANT
Once the system has been fully installed and powered on, verify
that the camera position has been adjusted so that it will capture
the desired area of the rear seat.
