Installing the Tablet Monitor Controller (TMC)
Digital Eyewitness
®
HD
In-Car Video System
2–6
Manual Part Number:
006-1219-00 Rev. 0
Headliner Mount
1.
Remove the passenger side sun visor clip. If this system will be using a combo mount
for the camera and Expanse wireless audio transmitter, do not install it until after
mounting the TMC.
2.
Remove the overhead console.
Figure 2-8.
Overhead Console Removed
3.
Locate the center point of the front edge of the overhead console.
4.
Cut the headliner ¼” left and right of the center point for a total of ½” width and ½ depth.
Leave the headliner material attached at the back of the cut. Cut out the plastic
substrate from the headliner substrate to allow the cable to pass through.
Figure 2-9.
Headliner Cutout
