Installing the Tablet Monitor Controller (TMC)
Manual Part Number:
006-1219-00 Rev. 0
2–3
Digital Eyewitness
®
HD
In-Car Video System
7.
Once the TMC cable is secured to the TMC connector, route the TMC cable in the
molded channel on the back of the display.
Figure 2-3.
Tablet Monitor Controller Cable Connection and Cable Routing
8. Grasp the TMC mounting plate by the plate, not the ball stud, and position it on the back
of the TMC so that the four (4) screw holes are visible.
Figure 2-4.
Align the Display Mounting Plate with the Holes in the Display
9. Acquire the four (4) screws for the TMC mounting bracket. Hand start the screws in the
four (4) holes. Once all four (4) screws have been hand started, use a Phillips head
screw driver to tighten the screws.
