60
Installation instructions for fitter
• Statutory regulations and the connection specifications issued by the local
power supply company must be strictly observed.
• On connecting the appliance, carrying out repairs or replacing the light bulb,
disconnect the appliance from the power supply. Unplug the appliance or
disconnect fuse.
• Ensure that all live connections are safely insulated when installing the oven.
• The appliance is supplied ready to plug in. It should be connected only to a
properly protected wall socket. Changing the position of a socket, exchanging
terminal conductors or the connecting cable may only be carried out by an
electrician under the observation of statutory regulations.
• If the socket is inaccessible after the installation, safety regulations require that
an all-polo isolator with a contact opening of at least 3 mm be used on the
installation side.
• The built-in cabinet for the combination steam oven must be temperature
resistant up to 100 °C. This applies particularly to veneers, plastic coatings,
adhesives, paint and varnishes. Adjacent cabinetry front must be temperature
resistant to at least 70 °C.
• Make sure that the appliance is installed perfectly horizontally on a firm, level
base. The base must be perfectly rigid.
• The kitchen unit must be fixed to the wall, using an angle bracket if required.
Electrics
Connection
standard mains plug into a wall socket.
Power consumption
at 230 V: 3.5 kW,
at 235 V: 3.6 kW
Power supply
230 - 240 V, 50 Hz
Fuse rating
16 A
