OC60-E2, OC95-E2, WSM
ENGINE
S-21
Motor Test (OC60-E2)
1. Disconnect the connecting lead to M terminal (1) and connect
a voltmeter across the lead and the body of the starter.
2. Connect a cable between the negative terminal of the battery
and the starter body.
3. Connect an ammeter and a switch in series between the
positive terminal of the battery and the connecting lead, and
run the starter.
4. The starter should run at the specified rate.
Solenoid Switch (OC60-E2)
1. Check the continuity across S terminal (1) and M terminal (2),
and across S terminal (1) and the body with an ohmmeter.
2. If not continuous, replace.
Motor Test (OC95-E2)
1. Remove the connecting lead (1) from the starter's C terminal
(2) and connect it directly to the battery's positive terminal.
2. Then connect the battery's negative terminal to the starter
body.
3. If motor rotates smoothly, it is O.K.
(1)
M Terminal
0000009399E
(1)
S Terminal
(2)
M Terminal
0000009401E
(1)
Connecting lead
(2)
C Terminal
0000009389E
