OC60-E2, OC95-E2, WSM
ENGINE
S-18
(4) Electrical System
Battery Voltage
1. Stop the engine.
2. Measure the voltage with a circuit tester between the battery
terminals.
3. If the battery voltage is less than the factory specification,
check the battery specific gravity and recharge the battery.
A
To avoid accidental short circuit, be sure to attach the positive cable to the positive terminal before the
negative cable is attached to the negative terminal.
A
Never remove the battery cap while the engine is running.
A
Keep electrolyte away from eyes, hands and clothes. If you are spattered with it, wash it away
completely with water immediately.
A
Keep open sparks and flames away from the battery at all times. Hydrogen gas mixed with oxygen
becomes very explosive.
A
If the machine is to be operated for a short time without battery (using a slave battery for starting), use
additional current (lights) while engine is running and insulate terminal of battery. If this advice is
disregarded, damage to alternator and regulator may result.
0000001139E
Battery Voltage
Factory spec.
More than 12V
(1)
Positive Terminal
(2)
Negative Terminal
0000010713E
