OC60-E2, OC95-E2, WSM
GENERAL
G-6
6. CHECK AND MAINTENANCE
[1] DAILY CHECK
Checking Engine Oil Level
1. Put the engine on a flat surface, and check the amount and
condition of the oil with an oil plug (1).
2. If the oil level is below the lower limit (2), add new oil up to the
upper limit (3).
3. When using an oil of different maker or viscosity from the
previous one, remove all old oil. Never mix two different types
of oil.
A
Use the proper engine oil viscosity (SAE) according to the
ambient temperature.
Checking Fuel Hose and Clamp Bands
1. If the clamps (1) are loose, replace with new ones.
2. The fuel and lubricating hoses are made of rubber and ages
regardless of period of service. Change the fuel pipes
together with the clamps every two year.
3. However, if the fuel and lubricating hose and clamp are found
to be damaged or deteriorated earlier than two years, replace
with new ones.
(1)
Oil Plug
(3)
Upper Limit
(2)
Lower Limit
0000009337E
(1)
Clamp
0000009344E
