Kubota M4N-071, Operator'S Manual

Page: 94 / 152

2. Front wheels-4WD
Front tread width can be adjusted as shown with the
standard equipped tires.
To change the tread width:
1. Remove the wheel rim and disk mounting bolts.
2. Change the position of the rim and tire to the
desired position, and tighten the bolts.
3. Adjust the toe-in as 2 to 8 mm.
(See Adjusting toe-in on page 115.)
IMPORTANT :
• Always attach wheels as shown in the drawing.
• If not attached as illustrated, transmission parts
may be damaged.
• When re-fitting or adjusting a wheel, tighten the
bolts to the following torques then recheck after
driving the tractor 200 m and 10 times of shuttle
movement by 5 m, and thereafter according to
service interval.
(See MAINTENANCE on page 94.)
(1) 260 to 304 N ⋅ m / 26.5 to 31 kgf ⋅ m / 192 to 224 ft ⋅ lbs
NOTE :
• Wheels with beveled or tapered holes: Use the
tapered side of lug nut.
TIRES, WHEELS AND BALLAST WHEEL ADJUSTMENT
88
M4N-071, M5N-091, M5N-111