3. Place the shift levers in
“NEUTRAL”
position.
(1) Hydraulic-shuttle shift lever
(2) Main gear shift lever
(F) “FORWARD”
(N) “NEUTRAL POSITION”
(R) “REVERSE”
4. Place the PTO clutch control switch in the
“OFF”
position and hydraulic control levers in the
“LOWEST”
position.
(1) PTO clutch control switch
(2) Position control lever
(3) Draft control lever
“ON”
“OFF”
(A) “DOWN”
5. Set the throttle lever at the minimum speed
position.
(1) Hand throttle lever
(2) Foot throttle
“INCREASE”
“DECREASE”
6. Insert the key into the key switch and turn it
“ON”
.
If the ambient temperature is below 0
℃
(32
℉
) and
the engine is very cold, turn the key to
“ON”
position
and hold it until the heater indicator turns off.
“OFF” (Engine-stop)
“ON” (Engine-run)
“ACC” (Electrical power-ac-
cessories)
“START” (Engine-start)
(1) Heater indicator
NOTE :
• The accessories can be used while the
engine is stopped.
• Do not leave the key at “ACC” position. The
battery will be quickly discharged. Turn it
back to “OFF” after use.
7. Check the Easy Checker
™
indicators.
8. Fully depress the clutch pedal.
OPERATING THE ENGINE
STARTING THE ENGINE
46
M4N-071, M5N-091, M5N-111
Summary of Contents for M4N-071
