Kubota M4N-071, Operator'S Manual

Page: 96 / 152

3. Rear wheels
Rear tread width can be adjusted, as shown, with the
standard equipped tires.
To change the tread width:
1. Remove the wheel rim and/or disc mounting bolts.
2. Change the position of the rim and/or disc (right
and left) to the desired position, and tighten the
bolts.
IMPORTANT :
• Always attach wheels as shown in the drawing.
• If not attached as illustrated, transmission parts
may be damaged.
• When re-fitting or adjusting a wheel, tighten the
bolts to the following torques then recheck after
driving the tractor 200 m (200 yards) and 10
times of shuttle movement by 5 m (5 yards), and
thereafter according to service interval.
(See MAINTENANCE on page 94.)
(1)
(2)
Steel disk Cast iron disk
260 to 304 N
⋅
m
26.5 to 31.0 kgf ⋅ m
191.8 to 224.2 ft
⋅
lbs
244 N
⋅
m
24.9 kgf ⋅ m
180 ft
⋅
lbs
260 to 304 N
⋅
m
26.5 to 31.0 kgf ⋅ m
191.8 to 224.2 ft
⋅
lbs
12.4-24
945 mm
(37.2 in.)
1000 mm
(39.4 in.)
1230 mm
(48.4 in.)
1335 mm
(52.6 in.)
1280 mm
(50.4 in.)
1385 mm
(54.5 in.)
380/85R24 ---
1090 mm
(42.9 in.)
1135 mm
(44.7 in.)
1240 mm
(48.8 in.)
1375 mm
(54.1 in.)
---
380/85R24 Cast ---
1130 mm
(44.5 in.)
1110 mm
(43.7 in.)
1185 mm
(46.7 in.)
1355 mm
(53.3 in.)
---
480/65R24 ---
1125 mm
(44.3 in.)
1115 mm
(43.9 in.)
1195 mm
(47.0 in.)
1345 mm
(53.0 in.)
---
(1) Rear wheel disc
(2) Rear wheel rim
(3) Tread
TIRES, WHEELS AND BALLAST WHEEL ADJUSTMENT
90
M4N-071, M5N-091, M5N-111