Kubota M4N-071, Operator'S Manual

Page: 141 / 152

lamp scratched. If broken, the glass may cause
injury. Pay more attention to halogen lamps in
particular, which have high pressure inside.
• Before replacing the lamp, be sure to turn off
the light and wait until the bulb cools down;
otherwise, you may get burned.
1. While pushing the right and left lock buttons, pull
and remove the electrical connector.
2. Turn the cover counterclockwise to remove it.
3. Turn the bulb base counterclockwise to take out the
bulb.
4. Replace it with a new bulb and reinstall the head
lamp assembly in the reverse order.
(1) Electrical connector
(2) Lock buttons
(3) Cover
(4) Bulb base (5) Bulb
(A) “Base's wider projection to
face upward”
IMPORTANT :
• Be sure to use a new bulb of the specified
wattage.
• Never touch the bulb surface (glass) with
bare hands. Fingerprints, for example, may
break the bulb.
SERVICE AS REQUIRED PERIODIC SERVICE
M4N-071, M5N-091, M5N-111
135