Kubota M4N-071, Operator'S Manual

Page: 58 / 152

3. Align the lock pin holes, insert both lock pins with
cushions and secure them with the lynch pins.
CAUTION
To avoid personal injury:
• Make sure that both lock pins are properly
installed as soon as the ROPS is in the
upright position and secured with the lynch
pins.
(1) ROPS
(2) Lynch pin
(3) Lock pin (4) Cushion
STARTING THE TRACTOR
1. Adjusting muffler direction.
• Muffler (M5N-091, M5N-111) on page 53
2. Adjusting the operator's position.
NOTE :
• The seat and suspension should be adjusted
to ensure that the controls are comfortably
at hand for the operator, ensuring that the
operator maintains a good posture and
minimizes risks from whole body vibration.
• Operator's seat on page 52
• Glove box on page 53
• Seat belt on page 53
• Tilt steering adjustment on page 53
3. Selecting light switch position.
• Light switch on page 54
• Turn signal switch and hazard light switch on
page 54
• Rear turn signal light and hazard light on page
54
• Front work light switch on page 55
4. Checking the brake pedal.
• Brake pedals (right and left) on page 55
5. Pull the position control lever to raise the
implement.
• Position control on page 81
6. Depress the brake pedals and release the parking
brake lever.
• Parking brake lever on page 56
7. Depress the clutch pedal.
• Clutch pedal on page 56
8. Selecting the travel speed.
• Travel speed control on page 57
• Travel speed limiter on page 58
• Main gear shift lever on page 58
• Range gear shift lever on page 58
• Creep speed (if equipped) on page 58
• Shuttle shift lever on page 58
•
Dual speed shift switch ( dual speed model) on
page 59
• 4WD and Bi-speed turn switch on page 59
9. Accelerate the engine.
• Hand throttle lever on page 60
• Foot throttle on page 60
10. Unlock the brake pedals and slowly release the
clutch.
1. Operator's seat
WARNING
To avoid personal injury or death:
• Make adjustments to the seat only while the
tractor is stopped.
• Make sure that the seat is completely secured
after each adjustment.
• Do not allow any person other than the operator
to ride on the tractor.
IMPORTANT :
• After adjusting the operator's seat, be sure to
check to see that the seat is properly locked.
(1) Travel adjust lever
(2) Suspension adjust lever
(3) Backrest tilt adjust lever (A) “UNLOCK”
(B) “TO INCREASE TENSION”
(C) “TO DECREASE TENSION”
Travel adjustment
Pull the travel adjust lever and slide the seat backward
or forward, as required. The seat will lock in position
when the lever is released.
OPERATING THE TRACTOR STARTING THE TRACTOR
52
M4N-071, M5N-091, M5N-111