Operation
95
With operation-warm engine, the heater air flows out of the air noz-
zles (1).
Operating the wiper/washer system (cab version)
All cab models are equipped with a wiper/washer system.
Switching on the windscreen wiper
!
The starter switch is in the RUN position.
!
Press the switch (1) to the WIPER/WASHER position.
The wiper operates as long as the switch remains in this position.
!
To switch off, press the switch (1) to the OFF position.
Lasting circulating air mode leads to overtiring of the operator! Circulating air mode for a longer period
of time can lead to lack of oxygen and overheating inside the cab. No cool fresh air flows in from the
outside. The operator therefore overtires quickly.
Risk of injury!
If you turn on the wiper while the windscreen is opened, the wiper may slide off the mounting bracket
attached to the cab frame hitting the inside of the cab. there is a risk of the operator’s face being hit
by the wiper.
- Do not turn on the wiper switch while the windscreen is open.
In extremely cold weather conditions, make sure the wiper rubber does not stick to the window. This
can damage the wiper rubber or the wiper motor.
Only switch on the wiper when the window glass is wet. If necessary, switch on the washer system
first.
STOP
1
STOP
1
