Lifting capacity of the excavator
152
Load suspension device
Assumed is a load suspension device with all the characteristics listed below.
!
The system must withstand a load two-and-a-half-times its rated lifting load, irrespective of the point at which
that load is applied.
!
The system must be designed in such a way as to practically exclude any objects which have been lifted falling
from the lifting attachment, for example by means of a protective attachment designed for this purpose.
!
The system must not allow the lifting attachment to slip from the implement to be lifted.
Do not lift loads which exceed the values indicated in the lifting capacity tables.
Always observe the maximum permissible lifting capacity of the hoisting gear (e.g. load hooks). The
lifting of loads over the maximum permissible lifting capacity is not allowed.
The values given in the tables apply only to level and hard grounds. When working on soft ground,
the machine can tip over easily, as the load is concentrated on one side only and the track or the
dozer can dig into the ground.
The values given in the tables apply only for loads without bucket. If a bucket is used, the weight of
the bucket must be subtracted from the values in the tables. The weight of mounted accessories (e.g.
clamp kit, quick release coupling, etc.) must be subtracted from the lifting capacity.
It is not allowed to swing the boom during lifting operation. The whole machine could tilt!
Counterweight (1)
(A)
(B)
KX015-4
Canopy
60 kg
1.69 m
0.95 m
Cab
10 kg
KX016-4
Canopy
60 kg
1.69 m
0.95 m
Cab
10 kg
KX018-4
Canopy/Cab
60 kg
1.69 m
1.09 m
KX019-4 SF
Canopy/Cab
90 kg
1.69 m
1.09 m
KX019-4
Canopy/Cab
90 kg
1.81 m
1.19 m
STOP
STOP
STOP
STOP
STOP
Vertical axis
Lift point height
Lift point
Lift point radius
