Maintenance
142
Checking the pipes and hoses of the heating system
!
Open the engine compartment cover (page 107).
!
Open the side cover (page 108).
!
All conduits and hose lines of the heater must be checked for state (cracks, bulging, hardening) and tight fit.
If there are any defects found, consult your KUBOTA dealer. Only trained staff may work on the heater.
!
Close the engine compartment and side cover.
Changing the Line Filter
!
Release the pilot circuit pressure.
!
Raise the LH control console (1).
!
Remove the lower trim panels.
!
Remove the hydraulic line (white).
!
Unscrew the line filter (2).
!
Screw in a new filter.
!
Reconnect the hydraulic line.
!
Reinstall the trim panels.
!
Change the RH control lever line filter.
Carry out the inspection while the engine is cold.
The replacement procedures are explained with the LH
control lever as an example; the RH control lever filter
replacement should be performed in the same manner.
