ASSEMBLY
OM 0336QH-A
19
IMPORTANT: The bolt heads (item 3
and 7) must be located on the
outside of the tractor frame as
shown on figure 6.
5.
Figure 6:
Install,
without
tightening
, the hose support
bracket (item 1) in the area shown
on the tractor frame (item 2) using
the M14 x 1.50mm x 50mm lg bolt
(item 3), the 14mm lockwasher
(item 4) and the M14 x 1.50mm nut
(item 5).
NOTE:
If you own a front loader, make
sure to place the hose support bracket
between the front loader bracket and
the tractor hood.
6. Figure
6:
Attach,
without
tightening
, the hose support
(item 6) to the hose support bracket
(item 1) with a 1/2"NC x 1 1/2" lg
hex. bolt (item 7), a 1/2"
lockwasher (item 8) and a 1/2"NC
nylon insert locknut (item 9).
7. Figure 6:
Place the hose support
(item 6):
at 14" for
B3200
at 8" for
all other tractors
from the tractor bumper as
indicated on figure 6 and tighten
the M14 x 1.50mm x 50mm lg hex.
bolt (item 3) and the 1/2"NC x 1
1/2" hex. bolt lg (item 7) according
to the
"Torque Specification Table"
at the end of the manual.
1
7
9
2
8"
6
1
2
4
5
8
6
3
T
RACTORS
B3030 WITH
OR
WITHOUT
C
AB
- B2630
Figure 6
1
2
3
4
5
6
8
9
7
8"
6
1
2
Figure 6
T
RACTORS
B7800 - B2710 – B2910
T
RACTOR
B3200
Figure 6
